最近更新された2022年10月テストエンジン練習テストはNACE-CIP2-001試験問題解答！ [Q12-Q35]

質問 12
Steel shot grit contaminated with oil or grease used in a cetrifugal blast cleaning should be

質問 13
It is always possible to see moisture on a steel substrate:

質問 14
NACE Standards include:

質問 15
When measuring the Dry Film Thickness Of liquid coatings applied to galvanized ferrous substrates the most commonly used instrument is the:

質問 16
When using a destructive Paint Inspection Gauge the NACE inspector must:

質問 17
Inspector reports should always be copied to:

質問 18
Inspection and Test Plans are provided to:

質問 19
Antifouling coatings are regulated by international treaties.

質問 20
Surface preparation methods for Non-ferrous metals are:

質問 21
Linings are used on the interior of pipelines to

質問 22
When a coating is expected to be exposed to temperatures above 93C (200 F) the best choice would be:

質問 23
Which standards are generally established by private-sector bodies and are available for use by any person or Organization, private or government?

質問 24
Differences in technique for abrasive blasting concrete versus steel require the operator to:

質問 25
Generally for safety considerations, waterjetting hose connections use

質問 26
Coating Surveys are legally required:

質問 27
You are the new NACE Level 2 Inspector on a job which had been very problematic. The previous Inspector was fired duo to personality conflicts with the Contractor’s supervisor. Upon arriving onsite the Contractor’s supervisor advises you in no uncertain terms that you will be the next to go, unless you cooperate with him.
Your FIRST preferred course of action is to:

質問 28
Cold-applied tape

質問 29
The main reason dehumidification is used during coating operations is to

質問 30
Non-Conformance Reports are designed to:

質問 31
Because a NACE Level 2 Inspector has been trained in specific destructive tests, it is up to the Inspector to decide if and when a destructive test is required.

質問 32
As a NACE Level 2 Inspector on a field job; prior to submission your documentation should always reviewed and approved by:

質問 33
Which concrete smoothing technique involves scrubbing a mixture of cement mortar over the concrete surface using ai cement sack, gunny sack, or sponge rubber float?

質問 34
On pipelines, which coating is identifiable by its distinct colors, usually light blue, green, or grey?

質問 35
Pre-cleaning of work pieces will NOT remove