[2022年10月]更新のNetwork Appliance NS0-520試験練習テスト問題 [Q118-Q134]

新問題 118
You currently have a FAS8200 with ONTAP 9.5. You want to expand the front end FC I/O capabilities. However, you are unsure which target adapters are supported.
What would you use to confirm which adapters are supported with your current configuration?

新問題 119
You are planning to expand a SAN-only ONTAP 9.5 cluster that consists of eight AFF A700 nodes.
In this scenario, what is the maximum number of additional AFF A700 nodes that would be added?

新問題 120
You are planning on implementing a new SAN on AFF A400 controllers. The data set consists of unique 1 KB files that will be encrypted before being written to the SAN.

新問題 121
A customer is using both FC and NVMe in a cluster. The customer needs to do some work on AFF_1.
Referring to the exhibit, what will happen?

新問題 122
You are creating an acceptance test plan and the subject of performance is raised. How should you define what the minimum performance should be?

新問題 123
You are planning few a new AFF A700 2-node switchless FC solution with two Cisco 9100 switches. Each AFF A700 will have one 16 Gb port Connected to each Cisco 9100 switch and four FC LIKs per physical port. You want to guarantee recovery from connection loss on a NetApp physical port and you are using single initiator to multiple target zoning.
What is the minimum number of zones required to accomplish this task?

新問題 124
A customer wants to deploy NVMe/FC along with an existing FC SAN fabric using ONTAP 9.8. In this scenario, which two actions are correct? (choose two)

新問題 125
Automatic host-side space management with SCSI T10 thin-provisioned LUNs is achieved by which feature of ONTAP?

新問題 126
What is the supported NVMe OS multipathing stack for VMware ESXi?

新問題 127
An administrator is testing a newly deployed SAN configuration and wants to simulate a node failure by administratively taking all FC physical ports down on a node that is serving data.
In this scenario, what should the administrator observe?

新問題 128
You have three Windows servers and one Linux server, each with dual-ported HBAs that are connected into a dual fabric.
In this scenario, what is the minimum number of zones that you need to create within each fabric switch?

新問題 129
After performing failover testing on a newly deployed MetroCluster configuration, some aggregates remain in a degraded state. Referring to the exhibit, which statement is true?

新問題 130
After completing the configuration of a new Brocade Fibre Channel switch, which command do you use to verify your configuration?

新問題 131
Which FC service is used by a host for discover service to locate FC targets that are available?

新問題 132
When setting up a VLAN for administrative security purposes, which four ports are the only important ports to include in the VLAN? (Choose four.)

新問題 133
An administrator who is using the Virtual Storage Console (VSC) creates a new FC datastore on an existing volume. While the datastore was provisioned, two hosts were in maintenance mode. When the maintenance was completed, the two hosts do not have access to the new datastore, but they have access to other datastores on the same volume.
In this scenario, what caused this result?

新問題 134
A storage administrator created a LUN using two ports on a storage system. Later, additional LUNs were added to the same node as the original LUN. After a while, the performance of the original LUN dropped beyond an acceptable level.
What would you advise to remedy the Issue?