NACE NACE-CIP2-001練習テストPDF試験材料 [Q14-Q29]

質問14、 The standards defining surface cleanliness achieved by centrifugal blast cleaning are:

質問15、 You are a NACE Level 2 Coating Inspector who has just arrived on a job in progress where there is no Inspection and Test Plan (ITP). The first morning you arrive the job is behind schedule and you are asked to take DIY Film Thickness readings.
Your FIRST preferred course of action is to:

質問16、 Steel shot grit contaminated with oil or grease used in a cetrifugal blast cleaning should be

質問17、 Which product, when closely inspected has a green or red layer of fusion bonded epoxy (FBE) that is visible directly on the steel?

質問18、 When completing the Final Inspection report the Inspector should write the report using:

質問19、 External coatings applied to buried pipelines are generally tested for:

質問20、 Thermal Spray coatings provide:

質問21、 The primary purpose of Fireproofing coatings are to provide:

質問22、 Coating surveys may include which steps?
Select All That Apply:

質問23、 You are the NACE Level 2 inspector reviewing the documentation from a NACE Level 1 you notice significant documentation errors.
Your FIRST preferred course of action is to:

質問24、 The Concrete Repair Institute’s comparators can be used to assess:

質問25、 When performing testing in accordance with ASTM D 2583 the inspector may observe:

質問26、 When a coating is expected to be exposed to temperatures above 93C (200 F) the best choice would be:

質問27、 When performing an adhesion test in accordance with ASTM D 3359 where the Dry Film Thickness is approximately 10 mils, the Inspector should use:

質問28、 Galvanizing performs best in which of the following exposures:

質問29、 Generally for safety considerations, waterjetting hose connections use