CTAL-TAE別格な問題集をダウンロードして無料で最新の（CTAL-TAEテスト問題集をゲット) [Q28-Q50]

Rate this post

CTAL-TAE別格な問題集をダウンロードして無料で最新の（CTAL-TAEテスト問題集をゲット2026年08月04日)

CTAL-TAE問題集は合格保証します合格できるCTAL-TAE試験問題2026年更新

認証試験は、理論的部分と実用的な部分の2つの部分に分けられます。理論的な部分は、自動化テストの概念、技術、およびツールに関する候補者の知識をテストする多肢選択式の質問で構成されています。実用的な部分では、候補者がさまざまなツールとフレームワークを使用してテスト自動化ソリューションを設計、実装、および維持する能力を実証する必要があります。

CTAL-TAE認定試験は、複数選択の質問で構成され、180分間続きます。候補者は、試験に合格し、認定を受けるために65％の最小スコアを達成する必要があります。試験は英語で実施され、オンラインまたはテストセンターで撮影できます。全体として、CTAL-TAE認定は、キャリアを進め、テスト自動化エンジニアリングの専門知識を実証したいソフトウェアテストの専門家にとって貴重な資格です。

質問 28
Consider a TAS implemented to perform automated testing on native mobile apps at the UI level, where the TAF implements a client-server architecture. The client runs on-premise and allows creation of automated test scripts using TAF libraries to recognize and interact with the app’s UI objects. The server runs in the cloud as part of a PaaS service, receiving commands from the client, translating them into actions for the mobile device, and sending the results to the client. The cloud platform hosts several mobile devices dedicated for use by this TAS. The device on which to run test scripts/test suites is specified at run time. You are currently verifying whether the test automation environment and all other TAS/TAF components work correctly. Which of the following activities would you perform to achieve your goal?

Manage the infrastructure that hosts the server, including hardware, software updates, and security patches

Check whether the references to the device on which the given test scripts/test suites will be executed are correctly hard-coded within these test scripts/test suites

Check whether the TAF libraries that the test scripts will use to recognize and interact with the app’s UI objects (widgets) function as expected

Check whether all test scripts that will be executed by the TAS as part of a given test suite have expected results

質問 29
Your goal is to verify completeness, consistency and correct behavior of an automated test suite. The TAS has been proven to successfully install in the SUTenvironment. All the preliminary checks to verify the correct functioning of the automated test environment and test tool configuration, installation and setup have successfully completed.
Which of the following is NOT a relevant check for achieving your goal in this scenario?

Checking whether all the test cases contain the expected results

Checking whether the post condition have been fulfilled for all the test cases

Checking whether the loading of the TAS is repeatable in the SUT environment

Checking whether all the test cases produce repeatable outcomes

質問 30
Consider a TAS that uses a keyword-driven framework. The SUT is a web application and there is a large set of keywords available for writing the automated tests that relate to highly specific user actions linked directly to the GUI of the SUT. The automated test written with the keywords are statically analyzed by a custom tool which highlight’s repeated instances of identical sequence of keywords. The waiting mechanism implemented by the TAS for a webpage load is based on a synchronous sampling within a given timeout. The TAS allows checking a webpage load every seconds until a timeout value

Changing thescripting approach to data-driven scripting

Implementing keywords with a higher level of granularity

Changing the wait mechanism to explicit hard-coded waits

Establishing an error recovery process for TAS and SUT

質問 31
To improve the maintainability of test automation code, it is recommended to adopt design principles and design patterns that allow the code to be structured into:

Highly coupled and loosely cohesive modules

Highly coupled and highly cohesive modules

Loosely coupled and highly cohesive modules

Loosely coupled and loosely cohesive modules

質問 32
Consider a TAS that uses a keyword-driven framework. The SUT is a web application and there is a large set of keywords available for writing the automated tests that relate to highly specific user actions linked directly to the GUI of the SUT. The automated test written with the keywords are statically analyzed by a custom tool which highlight’s repeated instances of identical sequence of keywords. The waiting mechanism implemented by the TAS for a webpage load is based on a synchronous sampling within a given timeout. The TAS allowschecking a webpage load everyseconds until a timeout value

Changing the scripting approach to data-driven scripting

Implementing keywords with a higher level of granularity

Changing the wait mechanism to explicit hard-coded waits

Establishing an error recovery process for TAS and SUT

質問 33
Which of the following attributes should NOT be included in a test execution report associated with a suite of automated tests?

Summary of the test execution results

System/Application under test and its version

Defect clusters identified during test execution

Environment in which the tests have been executed

質問 34
Which of the following statements about a test progress report produced for an automated test suite is TRUE?

The test progress report should indicate, for each test in the suite, the timestamps related to the test steps

The content of the test progress report should not be affected by the stakeholders to whom the report is intended

The test progress report should indicate the test environment in which the tests were performed

The test progress report should indicate, for each test in the suite, the start and end timestamps of the test

質問 35
(In User Acceptance Testing (UAT) for a new SUT, in addition to the manual tests performed by the end- users, automated tests are performed that focus on the execution of repetitive and routine test scenarios. In which of the following environments are all these tests typically performed?)

Build environment

Integration environment

Preproduction environment

Production environment

質問 36
You are evaluating the best approach to implement automated tests at the UI level for a web app. Specifically, your goal is to allow test analysts to write automated tests in tabular format, within files that encapsulate logical test steps related to how a user interacts with the web UI, along with the corresponding test data. These steps must be expressed using natural language words that represent the actions performed by the user on the web UI. These files will then be interpreted and executed by a test execution tool. Which of the following approaches to test automation is BEST suited to achieve your goal?

Test-driven development

Keyword-driven testing

Data-driven testing

Linear scripting

質問 37
Which of the following statements about the reuse of TAS artefacts is TRUE?

Reusable TAS artefacts can include components (or parts of components) associated with different layers of the TAA

To enable reuse of TAS artefacts, a good design for reuse is built into the TAA and to further action are needed during the TAS lifecycle

Communications maintenance and improvements for reusing TAS artefacts are modify addressed during the design of the TAA

Reusable TAS artifacts associated with the definition layer of the TAA include the adaptors to the SUT components and/or interfaces

質問 38
Which of the following is NOT an advantage of test automation?

The ability to perform tests which would be difficult or impossible to execute manually

The ability to run more tests in less time and therefore to make it possible to run them more often

The ability to find more defects with the same tests, compared to executing the same test manually

The ability to enable a better use of skilled testers by freeing them from repetitive and boring tasks

質問 39
Some automated regression test scripts run by a TAS in a given test environment make calls to private APIs that require authentication for all requests (the authentication method is the same for all APIs). The SUT is a business-critical system. The following two changes are planned: a change in the authentication method of all APIs and a minor upgrade of the OS (Operating System) in the test environment. You have updated the test scripts to cope with the change in the API authentication method. Which of the following sequences of activities is BEST to ensure that the test scripts are not adversely affected by these changes?

First upgrade the OS, then implement the change in the API authentication method, and finally run all the updated test scripts

Implement one change at a time and run a subset of the updated test scripts after each change, and finally run all the updated test scripts

First implement the change in the API authentication method, then upgrade the OS, and finally run all the updated test scripts

Implement one change at a time and run a subset of the updated test scripts after each change

質問 40
The last few runs for a suite of automated keyword-driven tests on a SUT were never completed. The test where the run was aborted was not the same between runs. Currently, it is not possible to identify the root cause of these aborts, but only determine that test execution aborted when exceptions (e.g., NullPointerException, OutOfMemoryError) occurred on the SUT by analyzing its log files. Test execution log files are currently generated, in HTML format, by the TAS as follows: all expected logging data is logged for each keyword in intermediate log files. This data is then inserted into the final log file only for keywords that fail, while only a configurable subset of that data is logged for keywords that execute successfully. Which of the following actions (assuming it is possible to perform all of them) would you take FIRST to help find the root cause of the aborts?

Log the stack trace and amount of memory available to the SUT at the start and end of each test in the suite, in the SUT log files

Split the generated log file into smaller parts, load them into external files that are loaded into the browser in transparent mode when needed

Log all expected logging data in the final test execution log file, not only for keywords that fail, but also for keywords that execute successfully

Use appropriate colors to effectively visually highlight different types of information in the test execution log files

質問 41
A release candidate of a SUT, after being fully integrated with all other necessary systems, has successfully passed all required functional tests (90% were automated tests and 10% were manual tests). Now, it is necessary to perform reliability tests aimed at evaluating whether, under certain conditions, that release will be able to guarantee an MTBF (Mean Time Between Failures) in the production environment higher than a certain threshold (expressed in CPU time). Which of the following test environments is BEST suited to perform these reliability tests?

Local development environment

Build environment

Integration environment

Preproduction environment

質問 42
You are currently designing the TAA of a TAS. You have been asked to adopt an approach for automatically generating and executing test cases from a model that defines the SUT. The SUT is a state-based and event-driven that is described by a finite-state machine and exposes its functionality via an API. The behavior of the SUT depends on hardware and communication links that can be unreliable.
Which of the following aspects is MOST important when designing the TAA in this scenario?

Looking for tools that allows direct denoting of exceptions and actions depending on the SUT events.

Adopting a test definition strategy based on classification tree coverage for the test definition layer.

Looking for tools that allow performing setup and teardown of the test suites and the SUT.

Adopting a test definition strategy based on use case/exception case coverage for the definition layer.

質問 43
You have been tasked with adding the execution of build verification tests to the current CI/CD pipeline used in an Agile project. The goal of these tests is to verify the stability of daily builds and ensure that the most recent changes have not altered core functionality. Currently, the first activity performed as part of this pipeline is the static source code analysis. Which of the following stages in the pipeline would you add the execution of these smoke tests to?

As a first activity, before performing static source code analysis and before generating the new build

After performing static analysis on the source code and before generating the new build

After deploying the new build to the test environment and before performing more extensive testing

As a final activity, immediately before releasing the new build into production

質問 44
You are working on a TAS forstandaloneapplication. The automated tests are developed based on a automation framework that allows interaction with GUI elements using on object orientated API. The GUI elements includemenus, buttons, radio buttons, text toolbars and their properties.
Whilst automating a test, you have discovered that the GUI elements of some third party components are not identifiable by the automated tool you are using.
Which of the following is the FIRST step that you take to investigate this issue?

Verify the testability support with the providers of the third party components

Verify whether the GUI identification depends on the browser.

Adopt an approach that uses the coordinates of the GUI elements instead

Verify whether naming standards for variables and have been defined for the current automation solution

質問 45
A suite of automated test cases was run multiple times on the same release of the SUT in the same test environment. Consider analyzing a test histogram that shows the distribution of test results (pass, fail, etc.) for each test case across these runs. Which of the following potential issues is MOST likely to be identified as a result of such an analysis?

Outliers in test execution times

Security vulnerabilities in automated test cases

Unstable automated test cases

Maintainability issues in automated test cases

質問 46
A SUT has an existing automated test suite.
Which of the following statements relating to the introduction of new features in the SUT is TRUE?

Automated tests are not affected by the introduction of a new feature and running them against the new SUT is a waste of effort

The introduction of a new feature could require updates or additions to the testware components

The test automation engineer should work with the business analysts to ensure the new feature is testable

It is generally more difficult to automate test cases for a new feature as the development has not yet started

質問 47
You are reviewing the testability of your SUT.
Which of the following BEST refers to the characteristic of OBSERVABILITY?

The ability of the SUTto perform its intended function for a specified period of time

The ability to exercise the SUT by entering inputs, triggering events and invoking methods

The ability of the SUT to prevent unauthorized access to its components or data.

The abilityto identify states, outputs, intermediate result and error messages in the SUT

質問 48
(Which of the following aspects of “design for testability” is MOST directly associated with the need to define precisely which interfaces are available in the SUT for test automation at different test levels?)

Autonomy

Architecture transparency

Controllability

Observability

質問 49
Consider a TAS that uses a keyword-driven framework. The SUT is a web application and there is a large set of keywords available for writing the automated tests that relate to highly specific user actions linked directly to the GUI of the SUT. The automated test written with the keywords are statically analyzed by a custom tool which highlight’s repeated instances of identical sequence of keywords. The waiting mechanism implemented by the TAS for a webpage load is based on a synchronous sampling within a given timeout. The TAS allows checking a webpage load every seconds until a timeout value

Changing the scripting approach to data-driven scripting

Implementing keywords with a higher level of granularity

Changing the wait mechanism to explicit hard-coded waits

Establishing an error recovery process for TAS and SUT

質問 50
Consider the following layers of the gTAA structure:
a.Test generation layer
b.Test definition layer
c.Test execution layer
d.Test execution layer
Consider the following capabilities associated with these layers.
Acquire all the necessary resources before each test and release all after run, in order to avoid interdependences between test Allow the automated test scripts on an abstract level to interact with components, configurations and interfaces of the SUT.
Design test directives that allow configuring the algorithms used to automatically produce the test cases a given model of the SUT.
Allow the definition and implementation of test cases and data by means of templates and/or guidelines.
Which of the following BEST matches each layer with the appropriate capability?

a-3, b-4, c-1, d-2

a-4, b-3, c-1, d-2

a-4, b-3, c-2, d-1

a-3, b-4, c-2, d-1

検証済みのCTAL-TAE問題集で問題と解答で合格保証試験問題集テストエンジン：https://www.goshiken.com/ISQI/CTAL-TAE-mondaishu.html

Tags: CTAL-TAEトレーニング費用, CTAL-TAE勉強方法, CTAL-TAE参考書勉強, CTAL-TAE合格対策, CTAL-TAE日本語解説集, CTAL-TAE試験資料, CTAL-TAE関連資格試験対応

CTAL-TAE別格な問題集をダウンロードして無料で最新の（CTAL-TAEテスト問題集をゲット) [Q28-Q50]

コメントを残すコメントをキャンセル

関連認証

CTAL-TAE 練習テスト

最近の投稿

アーカイブ

カテゴリー

CTAL-TAE別格な問題集をダウンロードして無料で最新の（CTAL-TAEテスト問題集をゲット) [Q28-Q50]

コメントを残す コメントをキャンセル

関連認証

CTAL-TAE 練習テスト

最近の投稿

アーカイブ

カテゴリー

コメントを残すコメントをキャンセル